Anticorrosive alkyd enamel paint for car chassi and components’protection. Resistant to water, gasoline and car oils.Gloss alkyd paint with low VOC content, suitable for protectionof cars’ chassis and other metallic equipment. Gives very goodadhesion, quick drying and very good water as gasoline resistance.Texture: Gloss > 80 units in 60º.Specific weight: 1,19-1,24 kg/lt.Covering power: 12-14m²/lt per layer depending on the surface.Dilution: Up to 5% on volume with SMALTOLUX WHITE SPIRIT for application by brush or roller and for spray application up to 12% on volume with No1 thinner ofVECHRO.Drying: 1-2 hours touch free. Drying through 3-4 hours.Recoatability: Recoatable 18 hours after application or after first layer’s hardening. These times prolong under cold and wet weather conditions.VOC class: “One-pack performance coatings. Anticorrosion finishes”. Type SB. VOC limit =500 gr/lt. Max VOC of product ready for use= 490gr/lt. It fulfills the requirements of E.C. legislation after 2011. VOC: organic volatile compounds with boiling point < 250ºC.SURFACE PREPARATIONClean the surface of dust, oil, cropped paints, rust. Sandpaper surfacebefore stain, especially if it was oil painted. Use solvent to clean thesurface before application.APPLICATIONStir well till thinner is fully embodied. Apply one-two coats CHASSI COAT.For better protection, primed surfaces should be painted with the suitablefinish paint such as GUMILAK metal, SMALTOLUX extra or any enamel paintfrom VECHRO.CLEANING EQUIPMENTWhile working keep your equipment wet, either in the pot, or in the paintlauder. Strain well your tools from paint back to the pot and clean immediately with thinner, water and soap.APPLICATION CONDITIONSTemperature 8-30 ºC and relative humidity lower than 80%. Contraryweather conditions may degrade paint’s quality.STORAGEStore in a cool place, protect from freezing and sun exposure. Close thecan well after application to keep in good condition. Recover unused paintfor re-use. Reuse of paint can effectively minimize the product’s life cycleenvironmental impact.